15"LCD 4/8-channel H.264 DVR COMBO
29
The advanced functions include the 7 options of alarm setup, system information,
motion detection, mobile phone monitoring, system maintenance, PTZ Setup and
Network Setup.
3.7.1
3.7.1
3.7.1
3.7.1 Alarm
Alarm
Alarm
Alarm setup
setup
setup
setup
Move the cursor to the “Alarm Setup” option (the icon is surrounded by a yellow
frame to indicate selection), and press “Enter” to enter the setup screen of this
option, as shown below:
I/O
I/O
I/O
I/O state
state
state
state alarm
alarm
alarm
alarm
: Each channel corresponds to an I/O state alarm, i.e., when the
alarm input of a channel is valid, the alarm record of the corresponding channel
will be started.
Normal
Normal
Normal
Normal On
On
On
On
: The external alarm circuit is open at ordinary times, and closed
when there is an alarm.
Normal
Normal
Normal
Normal Off
Off
Off
Off
: The external alarm circuit is closed at ordinary times, and open
when there is an alarm.
Note
Note
Note
Note
: When an alarm is produced, a red letter “I” will be displayed above the
corresponding channel.
Harddisk
Harddisk
Harddisk
Harddisk failure
failure
failure
failure alarm
alarm
alarm
alarm
: On: When the system cannot identify the harddisk, an
alarm will be generated, and a red mark “H” will be displayed at the bottom left
corner of Channel 1 in the lower part of the Video Preview screen.
Not
Not
Not
Not enough
enough
enough
enough space
space
space
space of
of
of
of harddisk
harddisk
harddisk
harddisk
: On: When the remaining space of the harddisk is
less than 500M, the lower part of the Video Preview screen will display: “The
space of the harddisk is not enough. Please change the disk after shutdown.”