San Telequip SC11U Скачать руководство пользователя страница 1

 

San Telequip Private Limited., 
504 & 505 Deron Heights, Baner Road 
Pune 411045, India 
Phone   : +91-20-27273455, 9764027070, 8390069393           Connecting. Converting. Leading! 
email     

[email protected]

  

 

 

 

 

                             

 

                        

 

User’s Manual: Isolated, RS232 / RS485 to USB Converter. Model SC11U

 

 

Introduction

 

 

The SC11U allows you to connect your Serial devices to various systems by using a USB (Universal Serial Bus ) 
Interface. The Serial port is RS232 / RS485 & RS422 configurable. With Auto Detect and Auto baud rate function 
SC11U is able to automatically detect the data flow and switch the direction of the data lines as well as to 
automatically configure RS422/485 signals to any baud rate. 3000VDC Optical Isolation and Surge-protection on each 
data line gives the interfacing devices protection from high voltage spikes. It draws Power from the USB port & does 
not need any external adapter. SC11U supports speed upto 115.2 Kbps. It is fully compatible with USB V1.0 to 2.0 

 

 

Specification

 

 

USB 1.0, 1.2 & 2.0. 12Mbps 
Serial Ports: Auto Detect 
RS232 signal: Rx, Tx, Gnd, CTS, RTS, DSR, DTR 
RS422 signal: Differential 4 full-duplex wires. 

 

RS485 signal: Differential 2 half-duplex wires. 
Built in Terminal 100 Ohm Terminal resistor SW selection ON/OFF 
Serial Parameters: Parity: None, Odd, Even, Mark, Space. 
Data bits: 5,6,7,8. 
Stop bits: 1, 1.5, 2. 
Flow Control: Xon / Xoff or Hardware 

 

Communication Speed: From 300bps to 921kbps for RS232 & 320kbps for RS485, Auto switching. 
Surge Protection on RS422/485 lines. 
Distance: Up to 4000ft (1250M) 
Cable : USB Type A to Type B 
Connection type: RS232:DB 9 Pin Male. 

 

                            RS485/422: 4 Pin Screw Terminal. 
Signals LED: Power on TX, RX. 
Isolation Voltage: 3000V DC 
ESD Protection: 15KV on all signals 
Surge Protection: 600W on all 485/422 lines 
Operating environment: 0 to 60 C 

 

Storage temperature: -20 to 70 C 

 

Dimension: 88mm X 91mm X 27mm 
Weight: 95g 
Power Supply: USB Port 
OS supported: Win 7,8.1, 98/ME/2000/XP/2003 //Vista, Win 10, Linux, Mac. 

 

 

LED Indicators

 

SYS (Red) 

: Power,

 

 

RX (Orange) 

: Data received indicator

 

TX (Green) 

: Data sent indicator 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB to RS232 / RS485 / RS422 Optically Isolated Converter

 

Отзывы: