San Telequip Private Limited.,
504/505 Deron Heights, Baner Road, Baner
Pune 411045, Mah, India
Phone: +91-20-27293455,9764027070,8390069393 Connecting. Converting. Leading!
email:
_______________________________________________
Page 9 of 65,
3.2.1 Configure Automatic IP Assignment with DHCP
A DHCP server can automatically assign addresses to LAN1 or LAN2, the Subnet Mask, and the
Gateway. You can simply check
“DHCP”
box in the Network Setting dialog using our
Utility
and then
restart it; once restarted it will be automatically configured.
3.3 Web Overview
In this section, only current information on the device’s status and settings will be displayed.
Fig. 3. 3
Model Name
as its name implies, shows the device’s model.
Device Information
displays information on the Kernel version, as well as the AP
Network Information
here you may find the Mode in which the device is currently working on
(Dual Subnet, Redundancy Mode), and both LANs respective MAC and IP addresses.
Dual Subnet Mode: in which
two Ethernet ports have separate IP addresses and subnets
Redundancy Mode:
the system will just use one port for data transfer, if this port is
disconnected, the whole system will change to another port automatically.