81
11-2
INTIAL SCREEN OF NBDP TERMINAL
When the power switch is turned on, the initial screen is displayed as shown below.
11-2-1
INITIAL SCREEN FUNCTION DESCRIPTION
Displays the call to CHANNEL and the current CHANNEL.
Set the transmission frequency.
Set the receive frequency.
Displays RF.GAIN setting value as a graphical bar .
You can increase or decrease the RF gain by using the up / down arrow keys
and adjust it to an appropriate value. (0 to 100 steps)
This function adjusts intelligibility when receiving. It can be increased or
decreased by using up / down buttons to adjust receive listening best.
(Adjustment range: ± 10Hz)
It is a function to attenuate reception gain. It can be adjusted in 4 steps by up /
down buttons.
OFF : 0dBm 1 : 10 dBm
2 : 20dBm 3 : 30 dBm
The transmission output can be adjusted to HIGH / MID / LOW.
It automatically adjusts the gain of the input signal and can be turned ON / OFF
by the up and down arrow keys.
Display the level of the volume as a graphic bar with 0 to 100 steps.
