13
CHECKING THE BATTERY STATUS
The battery status can be checked by looking at the battery status icons given
below that appear on the LCD panel of the phone.
Low Battery Indication
When the battery energy is completely discharged, the phone makes a warning
sound and the battery icon starts to blink. It is recommended to change to a new
battery or charge the battery immediately. If the phone is still used after the warn-
ing sound and blinking, the battery will be completely discharged and the power
will automatically go off.
12
When using the phone for the first time after purchase, fully charge
the battery before use since the battery may be discharged.
BASIC FEATURES
TO TURN THE POWER ON
Press the button for more than 2 seconds.
•
After purchasing the WIP-5000M phone and first turning the power on, the
‘UNREGISTERED’ message will show up on the top of the initial screen. In this
case, you should register the phone using
[MENU]
6. System
1.
For detailed procedures, refer to the descriptions on the
‘System’ submenu of the ‘Application Menus’ in this User Guide.
•
If registration fails, the system displays a ‘Unregistered’ or ‘Register Fail’ mes-
sage on screen. In such cases, follow the troubleshooting procedure described
in ‘Phone registration failure’ of ‘Annex’, and if the problem is still not solved,
contact the system administrator, reseller, or the service center.
•
For the initial screen, one display can be selected from 3 displays shown as fol-
lows.
Home Page
Table of Contents
WIP-5000M Guide
