Engl
ish
English
45
Maintenance
Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle.
Drum Clean+
Certain usage and environmental conditions may result in some residue build-up or odor in the washer
drum. To prevent this build-up or odor and keep your washer drum fresh and clean, perform the Drum
Clean+ cycle at least once a month or every 40 cycles. Perform the recommended procedure below when
using the Drum Clean+ cycle.
1.
Tap .
2.
Turn the
Navigation dial
to select
Drum Clean+
.
3.
Tap and hold .
CAUTION
If there is chlorine bleach left in the washer drum for an extended period of time, rust can occur.
NOTE
• The water temperature for Drum Clean+ is defaulted to Extra Hot. This temperature cannot be changed.
• In the case where residue is present in the washer drum, add liquid chlorine bleach to the MAX level
line in the Manual detergent compartment before starting the Drum Clean+ cycle. Do not add the liquid
chlorine bleach to the other compartments (This is only the case for Drum Clean+ cycle).
• Do not exceed the max line. Do not use or mix any other detergent or chemicals during the Drum Clean+
cycle. If necessary, run a Rinse+Spin cycle after the Drum Clean+ cycle has completed to help remove
any remaining residue.
Drum Clean+ reminder
• After every 40 cycles, the washer displays the "
Drum Clean needed
" message for an hour to alert you to
run the
Drum Clean+
cycle.
• It is recommended to run the cycle regularly for hygienic purposes.
• You will see the
Drum Clean+
alert message when the washer completes a cycle. If you open the door,
the message disappears, and the display shows the
Drum Clean+
cycle setting screen automatically.
• The reminder will appear on the control panel for 5 additional consecutive cycles before turning off. The
next reminder will not appear until another 40 cycles have been completed.
Untitled-5 45
2023-03-03 6:00:21
