Samsung WEC8500 Скачать руководство пользователя

Страница: 274 / 689

CHAPTER 5. WLAN Management

page 274 of 689

5.4.5

Primary/Secondary Server Configuration

The DHCP relay/proxy can transmit a DHCP packet received from a client through

broadcast to maximum two DHCP servers. Here, the two servers are called a primary server

and a secondary server.

The configuration of primary/secondary servers can be done in the interface mode, but it is

also possible in the global mode. If the configuration exists both in the interface mode and

global mode, the configuration in the interface mode has a higher priority.

Configuration using CLI

[Configuration at Interface]

1) Go to configure



interface mode of CLI.

WEC8500# configure terminal
WEC8500/configure#interface [INTERFACE_NAME]

2) Enter the ‘dhcp server’ command.

To configure only a primary server, do not enter the information of a secondary server.



dhcp server primary A.B.C.D secondary A.B.C.D: Configures both primary/

secondary servers.



dhcp server primary A.B.C.D: Configures only a primary server.



no dhcp server primary A.B.C.D secondary A.B.C.D: Deletes both primary/

secondary servers.



no dhcp server primary A.B.C.D: Deletes a primary server.

[Configuration at Global]

1) Go to the configure mode of the CLI.

WEC8500# configure terminal
WEC8500/configure#

2) Enter the ‘ip dhcp-proxy default-dhcp-server’ command.

To configure only a primary server, do not enter the information of a secondary server.



ip dhcp-proxy default-dhcp-server primary A.B.C.D secondary A.B.C.D: Configures

both global primary/secondary servers.



ip dhcp-proxy default-dhcp-server primary A.B.C.D: Configures only a global

primary server.



no ip dhcp-proxy default-dhcp-server primary A.B.C.D secondary A.B.C.D: Deletes

both global primary/secondary servers.



no ip dhcp-proxy default-dhcp-server primary A.B.C.D: Deletes a global primary

server.

Содержание WEC8500


















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WEC8500

Отзывы:

Похожие инструкции для WEC8500

Бренды по названию

Популярные бренды

Samsung WEC8500, Руководство по эксплуатации

Результаты поиска

Содержание WEC8500

Отзывы:

Похожие инструкции для WEC8500

Бренды по названию

Популярные бренды