CHAPTER 3. Data Network Function
© SAMSUNG Electronics Co., Ltd.
page 133 of 689
Select an item in the list and perform detail configuration.
Figure 57. Time Profile Configuration Window (2)
After finishing configuration in the window, click the
<Apply>
button to apply it to the
system.
3.5.5.2
Applying to ACL
Configuration using CLI
1) Go to the fqm mode to configure the configure
ACL rule of CLI.
APC# configure terminal
APC/configure# fqm-mode
2) Apply a time-profile to ACL. The ‘no’ parameter is used to delete a time profile.
access-list ip [ACL_NAME] time-profile [PROFILE_NAME]
no access-list ip [ACL_NAME] time-profile [PROFILE_NAME]
Parameter
Description
ACL_NAME
ACL name to configure
PROFILE_NAME
Name of a time profile to configure
An example of applying ‘t1’ to ‘acl’ is
shown below.
APC# configure terminal
APC/configure# fqm-mode
access-list ip acl1 time-profile t1
3) To check the configuration information, use the ‘show running-config network’
command.
Содержание WEC8500
Страница 1: ...Ver 2600 00FK1RGA4 8 0 WEC8500 WEC8050 APC Operation Manual ...
Страница 153: ...CHAPTER 3 Data Network Function SAMSUNG Electronics Co Ltd page 153 of 689 Figure 75 Device Statistics Screen ...
Страница 304: ...CHAPTER 6 Wi Fi Configuration SAMSUNG Electronics Co Ltd page 304 of 689 Figure 172 AP Group Contry Code Configuration ...