Samsung Ubigate iBG3026 Скачать руководство пользователя страница 70

Страница: 70 / 132

CHAPTER 4. Module and Internal Option Card Installation

Port Numbering Examples

Port

Numbering

Corresponding Ports

0/0

Fast Ethernet management port.

0/1 and 0/3

Optical Gigabit Ethernet ports.

Main board
LAN Ports

0/2 and 0/4

Copper Gigabit Ethernet ports.

3/4

The lower optical Gigabit Ethernet ports.

3/9

The upper optical Gigabit Ethernet port.

3/0 thru 3/3

The lower four copper Gigabit Ethernet ports
numbered from right to left.

Ethernet
Switch Gigabit
Module Ports

3/5 thru 3/8

The upper four copper Gigabit Ethernet ports
numbered from right to left.

1/0 thru 1/9

The lower row of Ethernet ports numbered from
right to left on the 20-port LAN module in slot 1,
the right hand network module slot.

2/10 thru 2/19

The upper row of Ethernet ports numbered from
right to left on a 20-port LAN module in right hand
network module slot.

2/0 thru 2/21

Lower row of Ethernet ports numbered from right
to left on a 44-port LAN module.

LAN Module
Port

2/22 thru 2/43

Upper row of Ethernet ports numbered from right
to left on a 44-port LAN module.

1/0

Right most port on the WAN module in the right
hand network module slot.

WAN Module
Port

2/3

Left most port of four ports on the WAN module
in the left hand network module slot.

0/0/0

Port zero on a mini module in sub-slot zero in
main board in slot zero.

Mini Module
Ports

0/2/3

Port three on a mini module in sub-slot two in
main board in slot zero.

1/0/0

Right most port on the voice mini module in the
right hand sub-slot in the voice carrier module
plugged into the right hand network module slot.

Voice Carrier
Module
(VCU-A) Port

1/1/1

Left most port on a four port voice mini module in
the left hand sub-slot in the voice carrier module
plugged into the left hand network module slot.

Содержание Ubigate iBG3026





































































































































Результаты поиска

Содержание Ubigate iBG3026

Отзывы:

Samsung Ubigate iBG3026, Руководство по установке, Страница: 70 / 132

Результаты поиска

Содержание Ubigate iBG3026

Отзывы: