manualshive.com logo in svg

Samsung Ubigate iBG3026, Руководство по установке, Страница: 13 / 132

Поделиться
Скачать
Samsung Ubigate iBG3026 Скачать руководство пользователя страница 13

 

Ubigate iBG3026 Installation Manual/Ed.01 

© SAMSUNG Electronics Co., Ltd.

 

XI

 

Conventions 

The following types of paragraphs contain special information that must be 
carefully read and thoroughly understood. Such information may or may not 
be enclosed in a rectangular box, separating it from the main text, but is 
always preceded by an icon and/or a bold title. 
 

 

WARNING 

 

Provides information or instructions that the reader should follow in 
order to avoid personal injury or fatality. 

 

 

CAUTION 

 

Provides information or instructions that the reader should follow in 
order to avoid a service failure or damage to the system. 

 

 NOTE 

 

Indicates additional information as a reference. 

 
 

Information for Product and Technical Support 

For questions regarding the product and technical supports: 
 
http://www.samsungnetwork.com 
 
 

Revision History 

 

EDITION

DATE OF ISSUE 

REMARKS 

00 

10. 2007. 

First edition 

01 

08. 2008. 

Add VPN-SSL module 

 

Содержание Ubigate iBG3026





































































































































Отзывы:

Нет отзывов