Samsung Ubigate iBG1003, Руководство по установке

Страница: 48 / 72

CHAPTER 4. Connecting the Ubigate iBG1003
4-10
© SAMSUNG Electronics Co., Ltd.
Applying Power
Before applying power to an Ubigate iBG1003 router, make sure that the
appropriate procedures have been completed and that an operator console has
been connected to the router.
To apply power to the Ubigate iBG1003:
1.
Ensure that the Ubigate iBG1003 is connected to a power source.
2.
Switch the rocker switch on the Ubigate iBG1003 back panel to the on
position (I).
Then, the fan starts, the LEDs start to blink in different colors, and the Ubigate
iBG1003 performs a self test. On successful completion of the self test, the
system (SYS) LED will indicate Green and the other LEDs will be in various
states.
This is a normal condition when the router is not configured for
specific network line conditions.
The login prompt is displayed on the console screen.