Samsung Ubigate iBG1003, Руководство по установке

Страница: 10 / 72

GENERAL USER INFORMATION
VIII
© SAMSUNG Electronics Co., Ltd.
Installation Safety Guidelines and Warnings
Safety Recommendations
The Safety Warnings that appear in this document (such as the one below)
indicate a procedure that can harm you if not done correctly.
Electric hazard exists. Verify the power is turned off. Do not work on
energized equipment. Working on energized equipment can result in
serious electrical shock.
To avoid electric shock, do not connect Safety Extra-Low Voltage
(SELV) circuits (found in LAN ports) to Telephone-Network Voltage
(TNV) circuits (found in WAN ports).
This equipment must be installed and maintained by properly trained
service personnel. Make sure the proper electrical service is available
before plugging the unit and turning it on. Disconnect the
telecommunication lines before unplugging the main power connector.
Cover Panels
Do not operate the Ubigate iBG1003 with missing blank faceplates and cover
panels. These covers prevent exposure to hazardous voltages and currents
inside the chassis. They are important to maintaining proper air flow through
the chassis. They also prevent electromagnetic interference (EMI) that might
disrupt other equipment.
Laser radiation and EMI are present when the router cover panel is
open.