English - 23
English
Adjusting Your Monitor
Troubleshooting
Before calling for service, check the information in this section to see if you can remedy any
problems yourself.
If you do need assistance, please call the phone number on the warranty card, the phone
number on the back cover of this manual, or contact your dealer.
Table 2. Troubleshooting problems
Symptom
Corrective Actions
There is no screen image
•
Check to see that both the monitor and the computer
are plugged in and turned on.
“No Connection,
Check Signal Cable” appears
•
Check the signal cable connections between the
computer and the monitor.
“Sync. Out of Range” appears
•
Check the maximum resolution and the frequency on
the video port of your computer.
•
Compare these values with the data in the Display
Modes Timing chart, on page 26
The image is too light or too dark
•
Adjust the Brightness or Contrast settings.
The image is too large or too small
•
Adjust the Size settings.
The colors are distorted with dark or
shadowed areas
•
Activate the Degauss feature.
The power indicator is amber, amber/
green blinking or amber blinking
•
The monitor is using its power management system.
Check the power management utility on your
computer
You need the monitor driver software
•
You can download the driver from the internet at
http: //www.samsungelectronics.com/support/
downloads/monitor/index.html
9550eApp.book Page 23 Thursday, December 30, 1999 10:19 AM