Managing the Network Connected Devices
Wi-Fi Direct
Menu
→
Network
→
Wi-Fi Direct
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices to
your product directly without a router.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1.
Turn on the
Wi-Fi Direct
device and activate its
Wi-Fi Direct
function.
2.
Go to the
Wi-Fi Direct
screen (
Network
→
Wi-Fi Direct
). The product starts to search devices, and then displays
the devices on the
Wi-Fi Direct
screen.
3.
Select the desired Wi-Fi device.
4.
On the Wi-Fi device:
– For
PBC
: Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. The Connecting popup
appears, followed by the Connected pop-up. When it closes, you should see the device listed on the
Wi-Fi
Direct
screen as connected.
– For
PIN
: Input the displayed PIN on your device. The Connecting popup appears, followed by the
Connected pop-up. When it closes, you should see the device listed on the
Wi-Fi Direct
screen as
connected.
✎
If you want to disconnect the device, select the connected Wi-Fi device, and then select
Disconnect
.
Soft AP
Menu
→
Network
→
Soft AP
Using this function, you can connect the product to your mobile devices if your mobile devices do not support
Wi-Fi
Direct
.
The
Soft AP
screen lets you set the options for connecting Wi-Fi devices.
•
Soft AP
Turns
Soft AP
on or off. When
Soft AP
is set to
On
, your mobile devices can find the product name in Wi-Fi
connection list.
•
Security key
Enter a Security key at least 8 characters long using the remote control. Select Done when finished.
– If the security key is not at least 8 characters long,
Done
is not available.
– Input the generated security key into the device you want to connect.
– If the network does not operate correctly, check the security key again. An incorrect security key may cause a
malfunction.
English - 50
English - 51
Network Features
