Setting up a Wireless Network
Network Settings
Menu
→
Network
→
Network Settings
Set up the wireless network connection so you can use various Internet services such as
Smart Hub
and
AllShare Play
and perform software upgrades.
Automatic Wireless Network Setup
Most wireless networks have an optional security system that requires devices that access the network to transmit an
encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word
or a series of letters and numbers of a specified length you were asked to enter when you set up wireless security for
your wireless network.
If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will
have to enter the Pass Phrase during the automatic or manual setup process.
✎
Depending on your router or modem, you may be able to use a WPS PIN instead.
To set up your product’s wireless network connection automatically, follow these steps:
1.
Go to the
Network Settings
screen. (
Network
→
Network Settings
)
2.
Select
Start
. The network function searches for available wireless networks. When done, it displays a list of the
available networks.
3.
In the list of networks, select a network you want to connect to, and then select
Next
.
✎
If the wireless router is set to Hidden (Invisible), you have to select
Add Network
and enter the correct
Network Name
(SSID) and Security Key to establish the connection.
4.
If the Enter security key screen appears, go to step 5. If you selected a wireless router that does not have
wireless security, go to step 7.
5.
To set wireless security for the router, enter the
Security Key
(Security key or PIN).
✎
You can enter the
Security Key
(Security key or PIN) using a keyboard screen. Enter the
Security Key
using your remote.
✎
You should be able to find the
Pass Phrase
on one of the set up screens you used to set up your router or
modem.
6.
When done, select
Next
. The network connection screen appears and the verification process starts.
7.
When the connection has been verified, the "
You are connected to the Internet. If you have any problems using
online services, please contact your Internet Service Provider.
" message appears. Select
OK
.
✎
If the network does not accept the Security Key or PIN, select
Retry
or select
IP Settings
to enter the settings
manually.
✎
If you want to set up the connection manually, select
IP Settings
. Then, go to the next section, “Manual
Network Setup”.
English - 46
English - 47
Network Features
