Setting up a Wired Network
Network Settings
Menu
→
Network
→
Network Settings
Set up the wired network connection so you can use various Internet services such as
Smart Hub
and
AllShare Play
and
perform software upgrades.
Automatic Wired Network Setup
You can configure your product's wired network connection automatically when connecting your product to a network
that supports DHCP.
✎
If you have connected a LAN cable, the wired network set up screen appears automatically.
To set up your product’s wired network connection automatically, follow these steps:
1.
Go to the
Network Settings
screen. (
Network
→
Network Settings
)
2.
Select
Start
. The network test screen appears and verifies the network connection.
3.
When the connection has been verified, the "
You are connected to the Internet. If you have any problems using
online services, please contact your Internet Service Provider.
"
message appears. Select
OK
.
✎
If the connection process fails, check the LAN port connection.
✎
If the automatic process cannot find the network connection values or if you want to set the connection
manually, go to the next section, "Manual Network Setup."
English - 44
English - 45
Network Features
