Samsung SWA-8500S/ZA, Руководство пользователя

Страница: 10 / 24

ENG - 10
7. If the SWA-8500S does not connect, take the necessary steps
according to the LED Indicator’s status
LED status Action
LINK (Blue)
On
Connected with
the Soundbar
-
Blinking
Connection
standby status
Check if the Soundbar is turned on
Repeat steps 3 through 6.
STANDBY (Red) On Connection failure
Check if the Soundbar is turned on
1. Press the ID SET button on the back
of the Wireless Receiver Module with
a pen tip for 5~6 seconds until the
LINK LED indicator blinks (in Blue).
ID SET
L R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
ID SET
5 Sec
2. Repeat steps 3 through 6.
Others - Errors Contact a Samsung Service Center.
Compatible Models
• Compatible with select Samsung Soundbar. Please visit the Soundbar product page at
www.samsung.com/support for more information.
• Compatible model list is subject to change without further notice.