Samsung SVM-400 Скачать руководство пользователя

Страница: 45 / 215

Programming Your SVM

The SVM has been designed to simplify the installation procedure and minimise
setup time. The following procedures have been automated.

●

The Automated Attendant immediately recognises all extensions and groups

on the phone system.

●

A mailbox is created for every extension on the phone system.

●

The Day / Night service of the SVM system will change automatically when

the phone system changes.

●

Menus have been created to answer calls in the Day and Night mode. There are

also default menus for answering in the Holiday or Bad Weather mode.

QUICK SETUP

Although the setup process has been automated as much as possible, the follow-
ing procedures must be done manually.

●

Record a greeting for Day mode operation (prompt number 1001), Night mode

Programming - Page 34

Содержание SVM-400
























































































































































































































Результаты поиска

Содержание SVM-400

Отзывы:

Похожие инструкции для SVM-400

Бренды по названию

Популярные бренды

Samsung SVM-400, Техническое руководство и руководство пользователя

Результаты поиска

Содержание SVM-400

Отзывы:

Похожие инструкции для SVM-400

Бренды по названию

Популярные бренды