Samsung SVD-4120A, Инструкция по эксплуатации, Страница: 3 / 20

Features
Warning
Fine Picture Condition Under Very
Low Illumination (SENSE UP)
1/3 high density CCD and digital
processor permit high quality pictures to
be captured in very low light condition.
High Resolution
The horizontal resolution of 500TV lines
can be achieved by using a high density
CCD having Double Speed 410,000 pixels
SONY CCD, which provides clean,
noiseless and reliable pictures.
Wide Range ATW
The White Balance can be automatically
adjusted in response to light condition so
that you can observe in an appropriate
color balance.
IP66 Approved / Dust and Rain
Resistant
With dust and rain resistant design, the
camera can be installed outside under
building eaves or places that are exposed
to the dust and rain.
SSNR(Samsung Super Noise
Reduction) CHIP
SVD-4120A/AW has an assistant DSP
chip that can remove image noise
efficiently and it shows clean and obvious
image in low luminance
Electronic DAY/NIGHT
In normal or high luminance, camera
maintains color mode. On the contrary, it
get changed into B/W mode in low
luminance.
Auto Iris Vari-Focal Lens Built In
The focal length of lens is 3.8 to 9.5 mm,
equivalent to 2.5x zoom.(2.5 to 6.0mm,
equivalent to 2.4x zoom/SVD-4120AW)
The built-in lens allows the camera to
have a Wider Dynamic Range, therefore
you can use in various applications.
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a long time, a fire may
be caused.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not disassemble the camera.
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in fire or other hazards.