15
SPEED DOME CAMERA ACCESSORIES
14
SPEED DOME CAMERA ACCESSORIES
Installation Guide
STH-330PEV(Embedded indoor Housing)
1 .Attach the enclosed template to the desired installation location on the ceiling. Make 3 small holes
with a diameter of 50mm, at 120° intervals, according to the marks on the template. Then make a
200mm hole in the center, following the circular line on the template, to allow space for the
external cabling to be drawn through.
2. Match the arrow located on the protruding part
on the side of the installation bracket with the
arrow on the inside of the embedded indoor
housing. Use the 3 screws to secure it as
shown in the illustration on the right.
3. Connect the video cable, the controller cable, the power adapter
cable and ID cable to the Camera Holder
• Ensure that the arrow located on the protruding section of
the camera holder points in the same direction as the arrow
located inside the the outdoor housing when securing the
camera holder.
Caution
4. Install Eyebolts to the embedded indoor housing and attach the the anti-drop cable to within the
ceiling structure. Then use the three included screws to secure the embedded indoor housing to the
ceiling.
5. Assemble the dome camera with the embedded indoor housing by aligning the respective arrows
and then twisting the dome camera in right-handed direction. Then secure the two units using the
Anti-untied screw that's located in the protruding section.
6. Check to see if the dome camera is functional and that the unit is securely locked in place.
Assemble the decoration ring cover to the embedded indoor housing by rotating in counter-
clockwise direction. Installation is complete.
