manualshive.com logo in svg

Samsung SPC-3120, Руководство пользователя, Страница: 2 / 104

Поделиться
Скачать
Samsung SPC-3120 Скачать руководство пользователя страница 2

Copyright 
©2010 Samsung Techwin Co., Ltd. All rights reserved.

Trademark

 is the registered logo of Samsung Techwin Co., Ltd. 

The name of this product is the registered trademark of Samsung Techwin Co., Ltd. 
Other trademarks mentioned in this manual are the registered trademark of their respective company.

Restriction

Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this docu-
ment shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung 
Techwin.

Disclaimer

Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but 
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on 
the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document 
without prior notice.

Warranty

If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will 
resolve the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:

If the system behaves abnormally because you run a program irrelevant to the system operation.
Deteriorated performance or natural worn-out in process of time

•
•

12X SPEED DOME CAMERA

User Manual

Содержание SPC-3120









































































































Отзывы:

Нет отзывов