Samsung SNZ-6320 Скачать руководство пользователя страница 91

Страница: 91 / 150

Confirm that the NAS IP address and the camera IP address are in the same format.

ex) The NAS & camera subnet mask initial value is 255.255.255.0.

If the IP address is 192.168.20.32 then the NAS IP address should be in the range of

192.168.20.1~192.168.20.255.

Check whether you tried to access as another user without formatting the default folder saved

or used.

Confirm that you used recommended NAS equipment.

Once the setting is complete, change the setting of the NAS from <

off

> to <

and click the [

apply (

)

] button.

Access the NAS to check the available capacity and the total capacity.

If there is not enough space, check the data size and click on the [

format

] button to

format the NAS folder connected to the webpage.

Due to network access errors, you might be unable to save the NAS temporarily.

The data traffic will increase when the camera is set to higher resolution, higher bit rate, and/or higher

framerate.

If there is too much data traffic, some frame may be skipped although it is stored in a full frame.

When a frame skip occurs, images are saved at the rate of min. one image per sec.

English

_91

●

Setup

Screen

Содержание SNZ-6320























































































































































Результаты поиска

Содержание SNZ-6320

Отзывы:

Samsung SNZ-6320, Руководство пользователя, Страница: 91 / 150

Результаты поиска

Содержание SNZ-6320

Отзывы: