Samsung SNZ-6320 Скачать руководство пользователя страница 52

Страница: 52 / 150

setup screen

52_

setup screen

•

ATC sensitivity : Affect the transfer rate according to the variance in the network

bandwidth.

The transfer rate will be adjusted to the fastest if the bandwidth is <

very high

and adjusted to the latest if the bandwidth is <

very low

•

ATC limit : If the quality or frame rate is adjusted, the property will be changed to

the applied value (%) against the previous setting value (100%).

Note that if you reduce the property value too much, you may encounter flickering

on the screen. So it is advisable to adjust the value within the threshold.

It is recommended to apply ATC control only for cameras supporting ATC.

Set the ATC sensitivity to <

Very low

> in a network environment with high variance in the network

bandwidth.

If the network connection is unstable, you may encounter flickering on the screen.

When done, click [

apply (

)

MJPEG, H264 is the default profile and you cannot delete it or change the name and codec.

Содержание SNZ-6320























































































































































Результаты поиска

Содержание SNZ-6320

Отзывы:

Samsung SNZ-6320, Руководство пользователя, Страница: 52 / 150

Результаты поиска

Содержание SNZ-6320

Отзывы: