Samsung SNP-6321H, Руководство по настройке сети, Страница: 41 / 49

English _41
● ●
SETUP SCREEN
Configuring public DDNS in Camera Settings
1. Open the DDNS settings page and select < Public DDNS > for < DDNS >.
2. Enter the corresponding site’s host name, user name and password.
3. Click [ Apply ( ) ] button.
If the connection properly establishes, < (Success) > appears.
4. When done, click [ Apply ( ) ].
M 
To use DDNS service properly, both DDNS setup and the router’s port forwarding setup are required.
For port forwarding setup, refer to “
How to configure port forwarding ”. (page 23)
IP filtering
You can create a list of IPs that you want to grant or deny access to them.
1. From the Setup menu, select the < Network ( ) > tab.
2. Click < IP filtering >.
3. Select < Filtering type >.
• Deny : If selecting this, access from those IPs that are
added to the filtering will be restricted.
• Allow : If selecting this, access from only those IPs that are
added to the filtering will be accepted.
4. Click the [ Add ( ) ] button.
The IP list will be created.
5. Provide the IP that you want to grant or deny access from.
When you enter an IP address and a Prefix, the list of IP addresses available will appear in the right-side filter
range column.
M 
If selected < Allow > for IP Filtering and < IPv6 setup > of < Interface > is set to < Use >, both IPv4 and IPv6 addresses
of the computer currently configuring should be assigned.

The IP address of the computer used for the current setup cannot be added to < Deny >, it should be added to
< Allow >.

Only the IP addresses that are set to < Use > will be displayed in the filter column.
6. Select an IP to delete from the list.
Click the [
Delete ( ) ] button.
7. When done, click [ Apply ( ) ].