Samsung SNP-6321H, Руководство по настройке сети, Страница: 20 / 49

network configuration
20_
network configuration
M 
The password for camera access is identical to the “ admin ” login password.
Default value is “ 4321 ”.

In the IP installer, you can use the initial password, “ 4321 ” to set IP Address, Subnet Mask, Gateway, HTTP Port,
Device Port, IP type. After changing the network interface, for better security, access the web viewer and change the
password.

For the security purposes, you are recommended to use a combination of numbers, alphabets uppercase and
lowercase and special characters for your password.

HTTP Port is used to connect to the camera using web browser.
Default value is “
80 ”.

Device Port is to control video transmission.
Default value is “
4520 ”.
How to configure an IP address automatically using [Auto Set]:
1. Launch the IP Installer on the PC for IP configuration.
2. Click the [ Search ] button. A list of network devices using IP
addresses located at the same router is displayed.
3. Check the MAC address information and select a device to
configure.
4. Click on the [ Auto Set ] button.
[ Auto Setting ] window with IP Address, Subnet Mask and
Gateway entered pops up.
5. Type the password authentication number for camera
access and click the [
OK ] button. Configuration is now
complete.
M 
The password for camera access is identical to the “ admin ”
login password.
Default value is “
4321 ”.

In the IP installer, you can use the initial password, “ 4321 ” to
set IP Address, Subnet Mask, Gateway, HTTP Port, Device Port,
IP type. After changing the network interface, for better security,
access the web viewer and change the password.

For the security purposes, you are recommended to use a combination of numbers, alphabets uppercase and
lowercase and special characters for your password.

Device Port is to control video transmission.
Default value is “
4520 ”.