Samsung SNP-6320, Руководство пользователя, Страница: 129 / 172

audio detection
You can set to detect sound over the specified level and trigger an event accordingly.
1. From the Setup menu, select the
< event ( ) > tab.
2. Click < audio detection >.
3.
Set whether or not to <
enable >.
4. Set the audio detection’s sound level.
The lower the level, the smaller the
sound change is detected.
M
`
The audio detection level is designed
to normalize the input data to a value
between 1 and 100 and detect the signal
larger than threshold level. It is unrelated
to the decibel (dB) level.
5. Specify the activation time and activation
condition.
`
For more information about < Activation time
> and <
Action
>, refer to “
Alarm input ”. (page 123)
6. When done, click [ apply ( ) ].
M
`
If detected audio level is too low, set the audio input gain to a higher level in < Audio setup >.
`
You can use the audio detection function when the camera is connected with an audio input
device.
network disconnection
You can receive and save events of a physically disconnected network.
1. From the Setup menu, select the
< event ( ) > tab.
2. Click < network disconnection >.
3.
Set whether or not to <
enable >.
4. Specify the activation time and
activation condition.
`
For more information about < Activation
time > and < Action >, refer to “ Alarm input ”.
(page 123)
5. When done, click [ apply ( ) ].
English _129
●
Setup
Screen