setup screen
84_
setup screen
Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1.
From the Setup menu, select the
<
Video & Audio (
)
> tab.
2.
Click <
Smart codec setup
>.
3.
Select ROI Area.
•
Face detection : Active if a face is
recognized on the monitoring screen.
M
Face detection is enabled only if the
following conditions are met:
-
The face is positioned at ±45
degrees to the left or right from
the top.
-
The effective range of the face rotation is ±30 degrees vertically, and ±60 degrees horizontally.
-
The minimum size of the face is 20x20 based on the resolution of 320x240.
•
Manual : Specify the ROI area to monitor manually.
4.
Select a quality for the ROI area.
The ROI area will be displayed in the specified quality.
5.
If you set the area of interest by <
Face detection
> select <
Face detection
sensitivity
>.
As the sensitivity grows, face detection becomes more close and detailed.
6.
If you set the area of interest by <
Manual
>, then select the desired area with your
mouse and drag it.
You can specify up to 5 distinct areas.
7.
To cancel all the settings for the area, click the [
Clear (
)
] button.
8.
When done, click [
Apply (
)
].
J
The Smart codec will not be active if it is set to <
Off
> in <
Video profile
>. (page 68)
Содержание SNP-6201
Страница 1: ...NETWORK CAMERA User Manual SNP 6201 SNP 6201H ...
Страница 143: ...English _143 APPENDIX PRODUCT OVERVIEW SNP 6201 Unit mm inch Ø152 5 98 Ø133 2 5 24 ...
Страница 144: ...appendix 144_ appendix SNP 6201H Unit mm inch Ø220 8 66 1 1 2 inch PF TAP Diameter max 47 803mm Pitch 2 3091mm ...