Samsung SNP-6201, Руководство пользователя, Страница: 117 / 162

Audio detection
You can set to detect sound over the specified level and trigger an event accordingly.
1. From the Setup menu, select the
<
Event ( ) > tab.
2. Click < Event setup >.
3.
Select <
Audio detection > from < Event
action setup >.
4.
Set whether or not to <
Enable >.
5. Set the audio detection’s sound level.
The lower the level, the smaller the
sound change is detected.
M

The audio detection level is designed
to normalize the input data to a value
between 1 and 100 and detect the signal
larger than threshold level. It is unrelated
to the decibel (dB) level.
6. Specify the activation time and activation condition.

For more information about < Activation time
> and <
Action
>, refer to “
Alarm input ”. (page 105)
7. When done, click [ Apply ( ) ].
M

If detected audio level is too low, set the audio input gain to a higher level in < Audio setup >.
Network disconnection
You can receive and save events of a physically disconnected network.
1. From the Setup menu, select the
<
Event ( ) > tab.
2. Click < Event setup >.
3.
Select <
Network disconnection > from
< Event action setup >.
4.
Set whether or not to <
Enable >.
5. Specify the activation time and
activation condition.

For more information about < Activation
time > and < Action >, refer to “ Alarm input ”.
(page 105)
6. When done, click [ Apply ( ) ].
●
SETUP SCREEN
English _117