Samsung SNP-5430, Руководство пользователя, Страница: 91 / 184

English _91
●
Setup
Screen
wDr Setup
You can set to display a sharp image of the objects in a scene where both bright and dark
areas exist.
1. Select < Back light >.
2. Set < mode > to < wDr >.
3. Select each item and set it properly.
• WDR level : Specify the WDR
sensitivity level.
M `
If WDR mode is active, the shutter mode cannot be changed. Data transfer via the network is
available at up to 15 fps.
`
If the WDR mode is active, a moving object can cause an afterimage on the screen.
Ex)
J
`
If you select WDR, you may encounter the following problems. So set it to Not Used.
-
Unnatural change of colors that cause an unnatural image on the screen
- Noise on the bright area of the image
`
As the performance of the WDR function may differ depending on the bright-area size of the
image, it is recommended to optimize the installation angle for the best performance.
`
At night operation, this function will be activated only if the incoming highlight exceeds a certain
area in a low contrast environment.
`
Increasing the maximum value may cause an unnatural portion of the image.
< WDR OFF > < WDR ON >