Samsung SNP-5430, Руководство пользователя, Страница: 50 / 184

50_ network connection and setup
network connection and setup
Setting up port range forward for several network cameras
When several network cameras are connected to one Broadband Router device, you
should forward the TCP 943 port of the router to the TCP 943 port of a connected camera.
J `
If you don’t set properly the TCP 943 port of the router, you cannot get any video stream from the
web page of the camera.
• You can set a rule of Port Forwarding on the Broadband Router device through its
configuration web page.
connectinG to tHe camera from a SHareD LocaL pc
1. Run the IP Installer.
It will scan for connected cameras and
display them as a list.
2. Double-click a camera to access.
The Internet browser starts and
connects to the camera.
M
`
Access to the camera can also be gained by typing the camera’s IP address in the address bar of
the Internet browser.
connectinG to tHe camera from a remote pc via
tHe internet
Since using the IP Installer on a remote computer that is not in the Broadband Router’s network
cluster is not allowed, users can access cameras within a Broadband Router’s network by using
the camera’s DDNS URL.
1. Before you can access a camera in the Broadband Router network, you should have
set the port range forward for the Broadband Router.
2. From the remote PC, launch the Internet browser and type the DDNS URL address
of the camera, or the IP address of the Broadband Router in the address bar.
ex) http://www.samsungipolis.com/Product ID
M
`
For registering the DDNS settings, refer to “ Registering with DDNS ”. (page 102)