setup screen
88_
setup screen
rS-485/422
Configure the controller connection so that the camera’s PTZ can be controlled using the
controller connected to the camera’s RS-485/422 terminal.
1.
From the Setup menu, select the
<
ptZ ( )
> tab.
2.
Click <
rS-485/422
>.
3.
Click <▼
Show
>.
4.
Specify the serial port.
The communication protocol used by
the controller connected to the network
camera can be set (RS-485/422).
•
Protocol : Select the same protocol
version as the controller, choosing
from SAMSUNG-T / SAMSUNG-E /
PELCO-D / PELCO-P / PANASONIC
/ HONEYWELL / AD / VICON / GE /
BOSCH.
•
Camera ID : Set the camera ID (1-255).
•
Baudrate : Set the RS-485/422 communication speed.
5.
When done, click [
apply (
)
].
M
`
For this operation, the network camera and controller must be properly connected. Also, the
controller must have a serial port set to control the camera.
J
`
There may be functions that are not supported depending on the controller or protocol
specifications. Please see the following table for details.
Содержание SNP-5321
Страница 1: ...NETWORK CAMERA User Manual SNP L5233 SNP L5233H ...
Страница 149: ...English _149 appendix Product Overview SNP L5233 Unit mm inch Ø152 5 98 Ø133 2 5 24 ...
Страница 150: ...appendix 150_ appendix SNP L5233H Unit mm inch 1 1 2 inch PF TAP Diameter max 47 803mm Pitch 2 3091mm Ø223 4 8 8 ...