Samsung SNP-5321 Скачать руководство пользователя страница 62

Страница: 62 / 178

62_

web viewer

•

: Run a saved tour.

Refer to “

to configure the tour settings

” for details of tour setting. (page 85)

•

: Run a saved trace.

Refer to “

to set the tracing function

” for details of trace setting. (page 85)

•

: Run a saved home position.

Refer to “

to add the home position

” for details of home position setting. (page 81)

•

: Configure preset.

For details on preset configuration, see “

to configure the detailed settings for the

preset

”. (page 82)

to enable the area Zoom mode

•

: For zoom movement, click and drag to the location on the screen that you want

to move to.

•

: Change the current zoom factor to x1.

•

: Return to the previous area and settings.

•

: If navigated with Prev, it is switched to area and setting before navigation.

Содержание SNP-5321



















































































































































































Результаты поиска

Содержание SNP-5321

Отзывы:

Samsung SNP-5321, Руководство пользователя, Страница: 62 / 178

Результаты поиска

Содержание SNP-5321

Отзывы: