Samsung SNP-5321 Скачать руководство пользователя страница 5

Страница: 5 / 178

English

●

over

view

Battery

Batteries(battery pack or batteries installed) shall not be exposed to excessive

heat such as sunshine, fire or the like.

caution

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.
These servicing instructions are for use by qualified service personnel only.

To reduce the risk of electric shock do not perform any servicing other than

that contained in the operating instructions unless you are qualified to do so.
The CVBS out terminal of the product is provided for easier installation, and is

not recommended for monitoring purposes.
Please use the input power with just one camera and other devices must not

be connected.

the ite is to be connected only to poe networks without routing to the

outside plant.

Содержание SNP-5321



















































































































































































Результаты поиска

Содержание SNP-5321

Отзывы:

Samsung SNP-5321, Руководство пользователя, Страница: 5 / 178

Результаты поиска

Содержание SNP-5321

Отзывы: