Samsung SNP-5321 Скачать руководство пользователя страница 136

Страница: 136 / 178

upgrade / reboot

From the Setup menu, select the

System ( )

> tab.

Click <

upgrade / reboot

Select a desired item and set it

appropriately.

•

Upgrade : Performs upgrading the

system.

•

Factory default : Resets the system

to the factory default.

- Except network parameter & Open

SDK : Initialize all except for the network setting and lens settings as well as the

open SDK installation files and internal settings.

- All : Resets all settings including the camera settings. (however, the log

information will not be reset)

The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is

found, the previous settings will be restored automatically.

•

Configuration backup & Restore : Backs up the current system settings before

performing the restoration process. The system is automatically restarts after

backup or restoration.

•

Restart : Restarts the system.

setup screen

136_

setup screen

Содержание SNP-5321



















































































































































































Результаты поиска

Содержание SNP-5321

Отзывы:

Samsung SNP-5321, Руководство пользователя, Страница: 136 / 178

Результаты поиска

Содержание SNP-5321

Отзывы: