Samsung SNP-5321 Скачать руководство пользователя страница 111

Страница: 111 / 178

Set the <

upnp discovery

Cameras can be automatically searched in the client and operating system in

support of the UPnP protocol.

•

UPnP discovery : It specifies Able or Disable for UPnP Discovery.

•

Friendly name : Display the camera name.

Friendly name is displayed in the format of SAMSUNG-<Model Name>-<MAC

Address>.

In the Windows operating system which basically supports UPnP, the cameras connected to the

network are displayed.

Set the <

Bonjour

Cameras can be automatically searched in the client and operating system in

support of the Bonjour protocol.

•

Bonjour : It specifies Able or Disable for Bonjour.

•

Friendly name : Display the camera name.

Friendly name is displayed in the format of SAMSUNG-<Model Name>-<MAC

Address>.

In the Mac operating system, which support Bonjour by default, the connected cameras are

automatically displayed in the Bonjour bookmark of the Safari web browser.

If the Bonjour bookmark is not displayed, check Bookmarks Setup in the “Preference” menu.

When done, click [

apply (

)

English

_111

●

Setup

Screen

Содержание SNP-5321



















































































































































































Результаты поиска

Содержание SNP-5321

Отзывы:

Samsung SNP-5321, Руководство пользователя, Страница: 111 / 178

Результаты поиска

Содержание SNP-5321

Отзывы: