setup screen
88_
setup screen
QoS
You can specify the priority to secure a stable transfer rate for a specific IP.
1.
From the Setup menu, select the
<
network (
)
> tab.
2.
Click <
QoS
>.
3.
Enter an IP address to which you will
apply QoS.
M
`
The default prefix for IPv4 is 32;
For DSCP, the default is set to 63.
4.
Select an IP address to which you will
apply QoS.
Only the selected IPs can be prioritized.
5.
When done, click [
apply (
)
].
Snmp
With the SNMP protocols, you can allow the system or network admin to monitor the
network devices on a remote site, and configure the environment settings.
1.
From the Setup menu, select the
<
network (
)
> tab.
2.
Click <
Snmp
>.
3.
Specify the <
Snmp
>.
•
Enable SNMP v1 : SNMP version 1
will be active.
•
Enable SNMP v2c : SNMP version 2
will be active.
- Read Community : Provide the
name of the read community where you can access to the SNMP information.
The default name is <
public
>.
- Write Community : Provide the name of the write community where you can
access to the SNMP information. The default name is <
write
>.
Содержание SNP-5300
Страница 1: ...NETWORK CAMERA User Manual SNP 5300 SNP 5300H ...
Страница 113: ...English _113 appendix Product Overview SNP 5300 Unit mm inch Ø152 5 98 Ø133 2 5 24 ...
Страница 114: ...appendix 114_ appendix SNP 5300H Unit mm inch Ø220 8 66 1 1 2 inch PF TAP Diameter max 47 803mm Pitch 2 3091mm ...
Страница 133: ......