Samsung SNP-5300, Руководство пользователя, Страница: 71 / 134

English _71
●
Setup
Screen
• Tilt range : The tilt limiting range is selected.
• Action : PT limiting operation is set.
- [ ] : Start limit setting.
- [ ] : Provide the start and end points.
- [ ] : If you want to change the point setting, click this to return to the
input dialog.
Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1. From the Setup menu, select the
< audio & video ( ) > tab.
2. Click < Smart codec setup >.
3. Select ROI Area.
• Face Detection : Active if a face is
recognized on the monitoring screen.
M
`
Face detection is enabled only if the
following conditions are met:
-
The face is positioned at ±45
degrees to the left or right from the top.
-
The effective range of the face rotation is ±30 degrees vertically, and ±60 degrees horizontally.
- The minimum size of the face is 20x20 based on the resolution of 320x240.
• Manual : Specify the ROI area to monitor manually.
4. Select a quality for the ROI area.
5. If manually specifying the ROI area, select a desired area with the mouse pointer and
drag it as much as you want.
`
You can specify up to 5 distinct areas.
6. To cancel your selection, simply click [ ].
7. When done, click [ apply ( ) ].
J
`
The Smart codec will not be active if it is set to < Off > in < Video profile >. (page 61)