setup screen
102_
setup screen
5.
Specify the activation time and activation condition.
`
For more information about <
Activation time
> and <
Action
>, refer to “
Alarm input
”. (page 92)
6.
When done, click [
apply (
)
].
J
`
The default tampering detection function may not work properly in the following cases:
-
Under circumstances of simple background or low illumination and night time may lower the
detection sensitivity.
-
A severe shaking of the camera or a drastic change to the illumination can be considered a
tampering by mistake.
-
Detection of the tampering may take some time (maximum 5 seconds) right after the
tampering was made.
-
Once a tampering is detected, the camera will resume a normal operating after a certain
stability time (approx. 5 seconds) during which no detection will be performed.
SyStem Setup
product information
1.
From the Setup menu, select the
<
System (
)
> tab.
2.
Click <
product information
>.
3.
Check the camera information, or
provide details according to your
network environment.
•
Model : Model name of the product.
•
Serial number : Product serial
number.
•
Device name : Provide a device name that will be displayed on the Live screen.
•
Location : Specify the location where the camera is installed.
•
Description : Provide detailed
information about the camera location.
•
Memo : Provide an explanation about the camera for better understanding.
•
Language : Select a preferred language for the Web Viewer OSD.
M
`
The default language is set to <
English
>.
4.
When done, click [
apply (
)
].
Содержание SNP-5300
Страница 1: ...NETWORK CAMERA User Manual SNP 5300 SNP 5300H ...
Страница 113: ...English _113 appendix Product Overview SNP 5300 Unit mm inch Ø152 5 98 Ø133 2 5 24 ...
Страница 114: ...appendix 114_ appendix SNP 5300H Unit mm inch Ø220 8 66 1 1 2 inch PF TAP Diameter max 47 803mm Pitch 2 3091mm ...
Страница 133: ......