14
· English
Precautions
1.
Install the camera in a location with a good Wi-Fi signal and no interference.
2.
Keep it away from humidity such as around the humidifier.
3.
Keep it away from direct sunlight, strong light or dust; install it in a place with
clear view.
4.
Do not install it in a place where there are a lot of obstacles.
5.
Keep the lens clean at all times.
Wipe off the dust with a soft cloth.
Installing on the wall and ceiling using screws
1.
Remove the rubber packing attached to the
camera stand.
2.
Take out the screws (M3xL20) and anchors
(Φ5x25mm).
When installing on a wooden wall
3.
Fix the bracket to the wall using screws, as
shown in the next image. Using a Phillips
screwdriver, fasten screws in 2 screw holes on
the wall on which the camera is to be installed.
Installation (SNH-V6430BN)
Installing the outdoor bracket
1.
Install the outdoor bracket into the groove on the main body of the camera,
as shown in the figure below.
2.
Turn the housing to the LOCK [
] direction.
Main body