Samsung SND-5084R, Руководство пользователя, Страница: 83 / 172

• E-mail/FTP profile : Video profile to be transferred to the specified email or FTP
site.
`
Only the MJPEG codec can be set as the E-mail/FTP profile.
• Record profile : This is the profile that is applied to video recording.
• Audio-In : Sets whether to use audio for video recordings.
6. According to your situation, set ATC (Auto Transmit Control) mode.
• ATC mode : It adjusts the video
properties according to the variance
in the network bandwidth, controlling
the bit rate. Adjusting the bit rate
depends on the ATC mode.
- Control framerate : Reduce the frame rate if the network bandwidth drops down.
- Control compression : Control the compression rate if the network bandwidth
drops down.
Compression adjustment can cause deterioration of the image quality.
`
If < Bitrate control > is set to < CBR >, the encoding priority according to the ATC mode will be
fixed as below:
Bitrate control / ATC mode Control framerate Control compression
CBR Framerate Compression
• ATC sensitivity : Affect the transfer rate according to the variance in the network
bandwidth.
The transfer rate will be adjusted to the fastest if the bandwidth is < very high >,
and adjusted to the latest if the bandwidth is < very low >.
• ATC limit : If the quality or frame rate is adjusted, the property will be changed to
the applied value (%) against the previous setting value (100%).
Note that if you reduce the property value too much, you may encounter flickering
on the screen. So it is advisable to adjust the value within the threshold.
J
`
It is recommended to apply ATC control only for cameras supporting ATC.
`
Set the ATC sensitivity to < Very low > in a network environment with high variance in the network
bandwidth.
`
If the network connection is unstable, you may encounter flickering on the screen.
7. Select Able or Disable for the Crop Encoding function.
For more details, refer to “ to use crop encoding ”. (Page 86)
• Crop encoding : It cuts only the selected area out of the full screen and outputs it
at the resolution specified in < profile setting >.
The resolution should be less than the Crop Encoding setting area.
8. When done, click [ apply ( ) ].
English _83
●
Setup
Screen