Samsung SND-5084R Скачать руководство пользователя страница 27

Страница: 27 / 172

English

_27

●

aLL

ation & connection

inStaLLation (Sno-5084r)

precautions before installation

Ensure you read out the following instructions before installing the camera:

•

It must be installed on the area (ceiling or wall) that can withstand 5 times the weight

of the camera including the installation bracket.

•

Stuck-in or peeled-off cables can cause damage to the product or a fire.

•

For safety purposes, keep anyone else away from the installation site.

And put aside personal belongings from the site, just in case.

installation

This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the

external cable is not. You are recommended to install this product below the edge of eaves to

prevent the cable from being externally exposed.

Fix the camera in 3 holes by tightening the

three tapping screws supplied with the

product.

Connect the cables with the camera port.

Adjust the direction of the camera with the

L-wrench supplied with the product.

Содержание SND-5084R













































































































































































Результаты поиска

Содержание SND-5084R

Отзывы:

Samsung SND-5084R, Руководство пользователя, Страница: 27 / 172

Результаты поиска

Содержание SND-5084R

Отзывы: