English
_65
●
SETUP SCREEN
Network disconnect
You can perform the saving/relay/preset operation after receiving an event of a physically
disconnected network.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Network disconnect
>.
3.
Specify the use of “Network
disconnect”.
4.
Specify the activation time and
activation condition.
For more information about <
Activation
time
> and <
Action
>, refer to “
Alarm input
”.
(page 62)
5.
When done, click [
Apply (
)
].
Face detection
You can set to activate this function if a face is recognized on the monitoring screen.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Face detection
>.
3.
Specify the use of the face detection
function.
4.
Select a sensitivity level for detecting
the face.
The higher the level is, the better the
face will be recognized.
5.
Use the drag-and-drop method to
specify the face detection area.
6.
Specify the display of the face detection
area.
- If you set it to <
On
>, the detection
area will be boxed.
7.
Specify the activation time and
activation condition.
For more information about <
Activation
time
> and <
Action
>, refer to “
Alarm input
”. (page 62)
8.
When done, click [
Apply (
)
].