Samsung SNB-9000 Скачать руководство пользователя страница 99

Страница: 99 / 152

Alarm input

You can set the alarm input type, activation time, and operation mode.

From the Setup menu, select the
<

Event (

)

> tab.

Click <

Alarm input

Select the alarm input number.

Set whether or not to <

Enable

Select the type.

•

Normal open : It is normally open,
but if it is closed, an alarm will be
triggered.

•

Normal close : It is normally closed,
but if it is open, an alarm will be
triggered.

Specify the <

Activation time

•

Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.



If set to <

Always

>, the activation time cannot be changed.

•

Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.

•

[Clear (

)] : Reset all settings.

•

Hour : Drag your mouse at Activation
Time and set the time by hours.

•

Minutes : Click an area in Activation
Time and set the time by minutes.

English

_99

●

SETUP SCREEN

Содержание SNB-9000

























































































































































Результаты поиска

Содержание SNB-9000

Отзывы:

Samsung SNB-9000, Руководство пользователя, Страница: 99 / 152

Результаты поиска

Содержание SNB-9000

Отзывы: