manualshive.com logo in svg

Samsung SNB-9000, Руководство пользователя, Страница: 15 / 152

Поделиться
Скачать
Samsung SNB-9000 Скачать руководство пользователя страница 15

English 

_15

●

  

OVER

VIEW

Item

Description

c

Focus Adjustment 
Button

The button adjusts the focus of image automatically.

STATUS Indication 
Light

 

y

System boot up : red light is on

 

y

Normal working status : green light is on.

 

y

Network abnormal status : green light flashes.

 

y

Normal recording status : yellow light is on.

 

Lightning protective 
grounding port

Used to discharge the lightning current safely outside in order to protect the 
camera.

Test Monitor Out

Output port for test monitoring the video output. Use the test monitor cable 
to connect to a mobile display and check the test video.

Audio terminal

AUDIO OUT

Used to connect to speakers.

AUDIO IN

Used to connect to a microphone.

Micro SD Memory 
Card Compartment

Compartment for the Micro SD memory card. 

Network Port

Used to connect the PoE or Ethernet cable for network connection.

Reset Button

The button restores all camera settings to the factory default. 
Press and hold for about 5 seconds to reboot the system.

J

   

If you reset the camera, the network settings will be adjusted so that 
DHCP can be enabled. If there is no DHCP server in the network, you 
must run the IP Installer program to change the basic network settings 
such as IP address, Subnet mask, Gateway, etc., before you can 
connect to the network.

 

J

 

RS-485/RS-232 port only supports direct connection with pan/tilt driver and external connections 
of the RS-485/RS-232 controller is not supported.

Содержание SNB-9000

























































































































































Отзывы:

Нет отзывов