Samsung SNB-9000 Скачать руководство пользователя страница 101

Страница: 101 / 152

Time schedule

You can set to save the video data at a certain interval as scheduled regardless of the
actual occurrence of the event.

From the Setup menu, select the
<

Event (

)

> tab.

Click <

Time schedule

Set whether or not to <

Enable

Specify the <

Transfer interval

Specify the <

Activation time

•

Always : Always activates in operated
mode at the set interval.

•

Only scheduled time : Periodically
activates in operated mode at a
specified time and date.



The transfer interval setting value must be
smaller than the preset activation interval to succeed in image transmission.

Specify the activation conditions.

•

FTP : Specify the use of the FTP transfer if an event occurs.



Refer to “

FTP / E-mail

” for more details. (page 89)

When done, click [

Apply (

)

English

_101

●

SETUP SCREEN

Содержание SNB-9000

























































































































































Результаты поиска

Содержание SNB-9000

Отзывы:

Samsung SNB-9000, Руководство пользователя, Страница: 101 / 152

Результаты поиска

Содержание SNB-9000

Отзывы: