Samsung SNB-8000 Скачать руководство пользователя страница 9

Страница: 9 / 172

English

●

over

view

proDuct featureS

•

full HD video Quality

•

multi-Streaming

This network camera can display videos in different resolutions and qualities

simultaneously using different CODECs.

•

web Browser-based monitoring

Using the Internet web browser to display the image in a local network environment.

•

alarm

When an event occurs, video is either sent to the email address registered by the user, sent

to the FTP server, saved in a Micro SD card or NAS, or a signal is sent to the alert output

terminal.

•

tampering Detection

Detects tempering attempts on video monitoring.

•

motion Detection

Detects motion from the camera’s video input.

•

audio Detection

Detects sound louder than a certain level specified by user.

•

auto Detection of Disconnected network

Detects network disconnection before triggering an event.

•

onvif compliance

This product supports ONVIF Profile-S.

For more information, refer to www.onvif.org.

Содержание SNB-8000













































































































































































Результаты поиска

Содержание SNB-8000

Отзывы:

Samsung SNB-8000, Руководство пользователя, Страница: 9 / 172

Результаты поиска

Содержание SNB-8000

Отзывы: