Samsung SNB-8000 Скачать руководство пользователя страница 130

Страница: 130 / 172

upgrade / reboot

From the Setup menu, select the

System ( )

> tab.

Click <

upgrade / reboot

Select a desired item and set it

appropriately.

•

Upgrade : Performs upgrading the

system.

•

Factory default : Resets the system

to the factory default.

- Except network parameter & Open

SDK : Initialize all except for the network setting and lens settings as well as the

open SDK installation files and internal settings.

- All : Resets all settings including the camera settings. (however, the log

information will not be reset)

The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is

found, the previous settings will be restored automatically.

•

Configuration backup & Restore : Backs up the current system settings before

performing the restoration process. The system is automatically restarts after

backup or restoration.

•

Restart : Restarts the system.

setup screen

130_

setup screen

Содержание SNB-8000













































































































































































Результаты поиска

Содержание SNB-8000

Отзывы:

Samsung SNB-8000, Руководство пользователя, Страница: 130 / 172

Результаты поиска

Содержание SNB-8000

Отзывы: