manualshive.com logo in svg

Samsung SNB-6011, Руководство пользователя, Страница: 90 / 148

Поделиться
Скачать
Samsung SNB-6011 Скачать руководство пользователя страница 90

NAS (Network Attached Storage) guide

 

J

 

Since data may not be saved after a temporary network interruption when using NAS, it is 
recommended that you use SD at the same time to prevent loss of recorded images.

 

If the setting allows a Micro SD memory card and the NAS to be simultaneously connected for 
use, the higher priority for recording goes to the NAS.

 

If you activate Overwrite to the NAS by setting it to <

Off

> and the available capacity is below 1%, 

it will be saved in the Micro SD card.

 

If you are saving data in the NAS, you might be unable to save it when you insert a Micro SD 
memory card used by another camera.

 

NAS recommended specs : Refer to “

NAS recommended specs

”. (Page 11)

 

If you change the NAS saving while saving data in the NAS, it will not be reflected in the system 
immediately.

 

If you remove NAS equipment on your own while saving data, or if the network is disconnected, 
NAS saving operation will be terminated abnormally.

 

NAS saving allows only one camera to a folder. Logging in with another camera is not allowed, 
and the images will not be saved.

The following is a description of how to save data using the NAS according to the Synology 
NAS method, which is one of the recommended products.

1. 

Access the Synology NAS as an admin.
In this example, the NAS IP Address is 
set to [

192.168.20.253

].

setup screen

90_

 setup screen

Содержание SNB-6011





















































































































































Отзывы:

Нет отзывов