Samsung SNB-6005 Скачать руководство пользователя страница 105

Страница: 105 / 158

time schedule

You can set to save the video data at a certain interval as scheduled regardless of the

actual occurrence of the event.

From the Setup menu, select the

event ( )

> tab.

Click <

time schedule

Set whether or not to <

enable

Specify the <

transfer interval

Specify the <

activation time

•

Always : Always activates in operated

mode at the set interval.

•

Only scheduled time : Periodically

activates in operated mode at a

specified time and date.

The transfer interval setting value must be

smaller than the preset activation interval to succeed in image transmission.

Specify the activation conditions.

•

FTP : Specify the use of the FTP transfer if an event occurs.

Refer to “

FTP / E-mail

” for more details. (page 93)

When done, click [

apply (

)

English

_105

●

Setup

Screen

Содержание SNB-6005































































































































































Результаты поиска

Содержание SNB-6005

Отзывы:

Samsung SNB-6005, Руководство пользователя, Страница: 105 / 158

Результаты поиска

Содержание SNB-6005

Отзывы: