Samsung SNB-600, Руководство пользователя, Страница: 97 / 174

NETWORK SETUP
Interface
1. From the Setup menu, select the
<
Network ( ) > tab.
2. Click < Interface >.
3. Set the < Interface > and < IPv6 setup >
as necessary.
•
IP type : Select an IP connection type.
- Manual : Specify the IP address,
Subnet mask, Gateway, DNS1,
and DNS2.
- DHCP : IP address, gateway
and subnet mask will be set
automatically while DNS1 and DNS2 are both manually set.
- PPPoE : IP address, gateway and subnet mask will be set automatically while
DNS1, DNS2, ID and Password are set manually.
`
If you set it to <
Manual
>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
•
MAC address : Shows the MAC address.
•
IP address : Displays the current IP address.
•
Subnet mask : Displays the < Subnet mask > for the set IP.
•
Gateway : Displays the < Gateway > for the set IP.
•
DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
4. Set the < IPv6 setup >.
`
Set to < Use > to use IPv6 address.
•
Default : Use the default IPv6 address.
•
DHCP : Display and use the IPv6 address obtained from the DHCP server.
•
Manual : Enter IP address and gateway manually and use it.
5. When done, click [ Apply ( ) ].
J
`
The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous
settings will be restored automatically.
`
Once completed with editing, click [ Apply ( ) ] to apply changes and the browser exits.
After a while, connect again with the changed IP.
English _97
●
SETUP SCREEN